Search

Electrical Incinerator with Venturi Scrubber

Electrical Incinerator With Venturi Scrubber Specification:- Dia:- 600 mm. Length:- 2000 mm 1 Set. Temperature:- 300 °C. Material:- Stainless steel. Control SPM:- <100 mg/Nm3 (max) & 99.9% S02.....

Electrical Meter

Electrical Meters Voltmeter-Digital 0 to 220V DC Ammeter-Digital range 0 to 10 A Multi-Meter: Multi-meter digital for Ac, Dc & current & cell operated with probe....

Electrical Ohm Meter

Electrical Ohm Meter Used for checking continuity resistance measurement in the range of 0-1000 ohms. The grade moving coil meter in rectangular shape having overall size 110 x 80mm complete with on off switch, zero adjusting potentiometer Lead wire. Dial is accurately hand Calibrated Ranges available :- 0-25, 0-50, 0-100, 0-500 or 0-1000 ohms.....

Electrical Surgical Ceiling Pendant

Electrical Surgical Ceiling Pendant Cross Arm and Control box are molded from High strength Aluminum and the Surface is oxidized for durability. Cross Arm's rotation and height adjustment are controlled by imported electric motor. Rotation is flexible and free. Pneumatic brakes and mechanical brakes provide firm and accurate locking position. Power supply, Gas pipeline and communication lines are arranged separately in one set.....

Electrical Vibrator

Electrical Vibrator  The thin rod is magnetized longitudinally.  The solenoid is connected to A.C. mains through a suitable lamp resistance. The whole unit is mounted on a polished wooden base, complete with pulley, pan and cord.  A thin steel rod (called vibrator) is clamped at one end and passes through a small solenoid. The solenoid and a horse shoe shaped magnet cause it to vibrate with the frequency of A.C. supply.  A permanent horse shoe magnet is mounted on the base board and a steel rod passes between them.   The length of the vibrator is adjusted until its natural frequency corresponds with that of the supply.  The rod is slightly flattened at the free end and a hole is drilled in it so that a string can be tied through it. ....

Electrical Vibrator

Electrical Vibrator Manufacturer in India....

Electricity and Circuitry Classroom Set EDUCATIONLab

Electricity and Circuitry Classroom Set

Everything you need for a hands-on demonstration of electricity and circuitry.

This kit is designed for use in the classroom with 40 students working in pairs.

This set is packaged in a plastic box for easy storage.

This kit contains:

1.5V Lamp Bulb – 20 pcs

Bulb Holders – 20 pcs

Alligator Clip Leads – 80 pcs

Battery Holders, Size D - 20 pcs

Single Pole Single Throw Switches – 20 pcs

Electric Buzzer – 20 pcs

Cell Batteries – 20 pcs

Please note: Plastic storage box may differ from box pictured.

Brand of battery may change according to availability.

Electricity and Electromagnetism Kit

Electricity and Electromagnetism Kit It demonstrates the relationship between simple circuit electricity and more complicated electromagnetism theory.  This kit is an excellent tool for investigating electricity and magnetism.  Complex theories like field patterns, motor effect and induction come to life with this kit. Kit Includes:- 1x Rectangular coil 1x Circuit board with pins and holes for legs 1x Force board Leg (left)1x Force board Leg (right) 1x Electroscope bottle Type 3x Leads (300mm), black croc clips 1x Rheostat mounted 1x Resistor mounted 10 OHM 1x Resistor mounted 22 OHM 3x Leads (300mm), Red croc clips 1x Switch 1x Pair magnet 1x Leads (1m)  Black Croc 1x Solenoid for Induction 1x Ammeter  (Triple scale) 1x Voltmeter (Triple Scale) 1x Teacher’s guide 1x Leads (1m) Red  Croc 1x Resistor mounted 15 OHM 1x Lead (1m) Red croc to banana 2x Cell holders/battery tray 2x Cell pins 1x Pair carbon rods 5x Connectors 2x Perspex strips 260 x 30 x 3mm 2x Polythene strips 260 x 30 x 3mm 2x Pivot pin stands 1x Flannel cloth 1x Brass rod (90 Deg. Bend) 3x Bulb holders and bulbs 1x Split platform/magnet support 2x Plotting compasses 1x Pocket compass 1x “U” shape electromagnet 1x white screen 1x Mounted capacitor (1000 uf) 1x Mounted LED 1x Resistor 2.2K Ω (mounted) 1x Resistor 4.7K Ω (mounted)....

Electricity Assembly Kits Suppliers China

Electricity Assembly Kits Suppliers China....

Electricity Circuits Kit

Electricity Circuits Kit Each kit is supplied in two polystyrene trays which keep the units organised. The panels are then formed into circuits by connecting them together using 4mm stackable leads.  Each component such as a switch, rheostat, bulb holder, etc. is mounted on its own individual plastic panel with 4mm sockets.  This equipment is suited not just to teaching basic concepts about circuits, for key stage 2 students, but also has applications for further study into key stage 3 areas.  The Basic Electricity Kit has been designed as a low-cost, attractive and flexible alternative to the circuit-board approach to pupil investigations into simple circuits. ....

Electricity Distribution Board EDUCATIONLab

Electricity Distribution Board

Electricity Distribution Board, for use in electricity experiments when you have one power supply and want to distribute the power to a group of students.

Has 5 distribution outlets.

For use with small amount of current.

Strong plastic construction.

Banana plug inputs.

Distribution Box: 8.5 Inch (210mm) L x 3.4 Inch (85mm) W x 1.4 Inch (1000036mm) H

Electricity Economy Kit

Electricity Economy Kit Basic assortment of components suitable for introductory electronics.  Kit consists of:- 10 x Crocodile Leads 3 x 1.5V Cell Holders 5 x DPDT Slide Switch 10 x MES Lampholders 10 x MES Bulbs 1 x 6V Buzzer with connecting leads 1 x 3-6V Electric Motor....

Electricity Lab

Electricity Lab  Experiment Coverage:- To Study/ Experiment the following: Electricity by Chemical Action Electricity by Heat Electricity by Magnets Conductors and Insulators Resistor Color Code Resistors in series combination Resistors in Parallel combination Resistors in series and Parallel combination Ohm's Law Applying Ohm's Law Kirchhoff’s Current Law or Junction Rule Kirchhoff’s Voltage Law or Loop Rule Linear & Non Linear Resistance Measurement of Power AC & DC Power Fuses and Circuit Breakers Heating Effect & the Fuse Load in Series and Parallel Circuits Cells Connections Voltage in series & parallel Circuits Current in series and parallel Circuits Specifications: Meters: 5 Nos AC Voltmeter: 15V DC Voltmeter: 15V Galvanometer: ± 250uA DC Ampere Meter: 0.6Amp DC Ampere Meter: 5A Power Supply: Power Supplies: 3, 6, 12V at 3.5A Power Supply AC: 30V at 1A Power Supply DC: 5V at 100 mA Switch SPDT Switch DPDT Push switch Logic Switches Two No. Push type Relay 12V DC, One change over Buzzer/Electric Bell Transformer Input 6-0-6V and Output 6-0-6V Bulb 6V: 3 Nos....

Electricity Laboratory Kit Equipment Suppliers China

Electricity Laboratory Kit Equipment Suppliers China....

Electricity Micro science Kit

Electricity Micro science Kit This kit provides students working on an individual basis with an opportunity to study the basic principles of electricity.  Topics covered with the kit include: Electricity in the Home Batteries & Current Flow Circuits: Direction Series & Parallel Circuits Magnetic Effects & Chemical Reactions....

Electricity Science Kit

Electricity Science Kit Activities performed with this kit:- Understanding a complete circuit Which materials conduct electricity the best How do I change the brightness of a bulb Changing circuits Can you draw a circuit diagram How do I change the wires to affect the brightness of the bulb....

Electricity Technical Training Lab Equipment Suppliers China

Electricity Technical Training Lab Equipment Suppliers China....

Electricity Trainer

Electricity Trainer Object:- Experiments that can be performed To study the Resistances individually, as well as in series and in parallel connections. To study the voltage and current flo Electricity Trainer To study the Oersted experiment. To study the phenomenon of mutual induction. To construct and study the step down transforn1er with the help of given coils and cores. To construct and study the step up transformer. To study the effects of moving I core on a step up transformer. To convert a galvanometer into voltmeter. To convert a galvanometer into ammeter. Specification & Features: DC power Supply:  5V. 200 mA DC power Supply:  12V. 200 mA AC power Supply:  6V, lA Relay:  12V Galvanometer:  30 -0 -30 Galvanometer Resistance:  80 Ohm Light Bulbs (100003 Nos.) :  6V Potentiometers (100003 Nos.) :  25 Ohm. 1 W 10 K Ohm. 1 W  ....

Electro Hydraulic Trainer

Electro-Hydraulic Trainer Specification:- Hydraulic Components Hydraulic Power pack with following features        Operating pressure 40 bar approx., Flow rate 4-8lpm approx. Hydraulic Tank capacity 20 liters Geared pump coupled with induction motor 2HP 220V AC, 50 Hz,  and mounted externally over the tank with anti-vibration pads Having non-return valve, pressure relief valve Different type of valves 4/3 Double solenoid valve AC operated 4/2 Single solenoid valve AC operated    4/3 Way hand lever valve (Manual)    Flow control valve and Pressure reducing valve (Manual)    Pressure gauges 0-1500Psi - 3nos. Pressure gauges (glycerin filled) to measure the pressure at  Input Line Reduced pressure line at Cylinder 1 Reduced pressure line at Cylinder 2 Hydraulic Cylinders - 2nos. Double acting cylinder (Stroke length 100mm & diameter 32mm) Piston rod: Chrome plated and hardened Objective:- Study of different type of hydraulic components Extension and retraction of double acting hydraulic cylinder in a different way Using hand lever valve and flow control valve Using single solenoid valve and flow control valve Control the direction of hydraulic motor using double solenoid valve manually and using micro controller Cylinder moment using solenoid valve can be done automatically using micro controller Hydraulic pipe for fittings:- Connection type 3/8", Length 600mm - 15nos Connection type 3/8", Length 1000mm - 2nos         Hydraulic motor:- Type: Gear motor and Bi-directional         Electronic Controller 220 V AC operated 8051 CPU,  Memory 64kB Flash        Line indicator DOL starter start/stop button for Induction motor Double solenoid control switch (Manual and  Automatic) Single solenoid control switch (Manual and  Automatic) Push buttons for manual control for actuators  I, II,  & III USB cable connector Power requirement: 220VAC +10%, 50Hz Weight: -  65Kg Approx. (Main Control Unit) 70Kg Approx. (Hydraulic Power Pack) Dimensions (mm): 900(L) x 380(B) x 670(H)....

Electro Hydraulic Trainer

Electro Hydraulic Trainer It is precisely engineered using premium quality raw material and modern machinery at our unit in adherence with the prevailing industrial norms and standards.  Our experts conduct various quality inspections to ensure that Electro Hydraulic Trainer stands high on strength, quality, effectiveness and has a long life.  Technical Specification:- Operating pressure 40 bar approx., Flow rate 4-8 lpm approx. Hydraulic Tank capacity 20 liters. Geared pump coupled with induction motor 2 HP 220 V AC,50 Hz,  and mounted externally over the tank with anti vibration pads. 4/3 Double solenoid valve AC operated. 4/2 Single solenoid valve AC operated. 4/3 Way hand lever valve (Manual).    Double acting cylinder (Stroke length 100 mm & diameter 32 mm).....