Search

Indication and Recognition of Targets Chart

Indication and recognition of targets Chart Details:- Size:- 50 x 75 cm Laminated with thick plastic film on both sides. Fitted with superior plastic rollers.....

Individual Accelerometer Pedometer

Individual Technology Toolkit

Individual Technology Toolkit Description:- Created to be used with the technology kit, the toolkit has been designed for use by a single learner but could also be used by a group.  The kit makes building models and moulding plastics much easier.  Included in this kit is a sturdy plastic tray with divisions for easy storage. Kit includes:- Junior hacksaw Wood glue 125ml Screwdriver, flat, 3 x 60mm Hand drill 6mm chuck Drill bits 4, 5 and 6mm Utility knife, 8 point snap-off Safety ruler M-shaped Try-mitre square, 150mm Spanner, no. 7 Pliers combination 150mm File Table vice 60mm jaw Cutting mat 395 x 280 x 10mm Plastic tray 400 x 290 x 75mm Reamer drill 4 - 4.2mm Scissor, universal....

Indoor Outdoor Thermometer Clock

Indoor Outdoor Thermometer Clock Dual scale indoor-outdoor thermometer with clock, for a wide range of applications.  Size: 82 x 74 x 21mm. Sampling cycle: 10 seconds.  Temperature range: -50° to 70°C. °C and °F switchable, 0.1°C resolution LCD display.  AAA battery included. ....

Induced Current Apparatus

Induced Current Apparatus A soft iron core fits inside the primary. Consisting of primary coil of thicker enameled copper wire wound on insulated former with terminals, which slides inside secondary coil of thinner gauge copper wire mounted on a base with 4 mm terminals.....

Inductance Decade Box

Inductance Decade Box Manufacturer in India....

Induction Coil

Induction Coil....

Induction Coil

Induction Coil The Primaries are wounded with thicker Copper enameled covered wire on Lathe rite Pipe in two parts given heavy insulation, each layer is wounded in the cover of butter paper and after completing the winding the entire part is dipped in to hot wax, so that each layer get sealed against moisture effects. The coils are housed in a teak wood case handles to get the Spark on it, The make and break points are of Platinum, one point is adjustable to get any cycle, one reversing Switches, one on and off switch is provided working on 6-12 volt D.C. Length of Spark :- 1) 5mm 2) 10mm 3) 15mm 4) 20mm 5) 25mm 6) 50mm 7) 75mm 8) 100 mm 9) 150 mm Induction Coils :- Same as above but to work on 220 volt A.C. Mains 25 mm spark Completes set with same salient features extra superior quality. Induction coil Model: - for use with Kohiraush conductivity bridge. Mutual Self Inductance Coil :- Having primary coil 3000 turns Secondary coils of 1000, 2000 3000 turns Mutual and Self inductance Coil: - Having primary in 500 turns and secondary in 100, 250 500 turn with different tapping mounted on wooden bobins 25 cm. dia per pair. Mutual Self Inductance Coil: - Coils mounted on wooden bobins 25 cm in dia. Primary having 500 turns secondary also 500 turns. Per pair. Self Induction Coil: - 3000 turns, mounted on base with adjustable soft iron core.....

Induction Coil

Induction Coil Induction coils are mainly used in electrical experiments. The main function of these coils is to help in producing high voltage from low voltage direct currents. These are available in different spark lengths of 5mm, 10mm, 20mm and 25mm.....

Induction Coil Demonstration

Induction Coil Demonstration Demonstration Induction Coils consists of two coils wound on separate bobbins, one having many turns of fine wire & the other with few turns of heavy wire. It demonstrates that induced potentials are produced either by movement of a permanent or electromagnet or by a change of current in one coil, fitted with insulated 4 mm socket terminals & supplied with a soft iron core, outer coil is 12.5 cm long & is of 5 cm diameter.....

Induction Coil High Voltage Power Supply EDUCATIONLab

Induction Coil High Voltage Power Supply

• Powerful & highly efficient, this High Voltage Power Supply cranks out over 60,000 volts for all your High Voltage projects.
• Perfect for powering a wide variety of high energy & fascinating experiments such as homemade X-ray tubes, table-top particle accelerators, electrostatic 'antigravity' levitating devices, ion engines, energize grislier discharge tubes, spectrum tubes, etc.
• This is an all electronic/solid-state power supply that outputs high voltage (unfiltered) DC adjustable from about 10,000 volts to over 60,000 volts.
• Output current is approximately 2 mA.
• We do not take responsibility for any injury or mistake in the use of this product.
• A preview of the included instructions can be found at the bottom of this listing.
• Measurements are approximate.

Induction Coil High Voltage Power Supply EDUCATIONLab

Induction Coil High Voltage Power Supply

Powerful & highly efficient, this High Voltage Power Supply cranks out over 60,000 volts for all your High Voltage projects.

Perfect for powering a wide variety of high energy & fascinating experiments such as homemade X-ray tubes, table-top particle accelerators, electrostatic 'antigravity' levitating devices, ion engines, energize grislier discharge tubes, spectrum tubes, etc.

This is an all electronic solid-state power supply that outputs high voltage (unfiltered) DC adjustable from about 10,000 volts to over 60,000 volts.

Output current is approximately 2 mA.

We do not take responsibility for any injury or mistake in the use of this product.

A preview of the included instructions can be found at the bottom of this listing.

Induction of Immune Response Model

Industrial Double Bridge

Industrial Double Bridge Standard Resistance :  here are 10 coils of .01 ohm each arranged on a rotary dial plus a circular slide wire of total resistance .01 ohm and 500 sub-divisions is equal to .00002ohms on the normal range. Multiplying Ratios:  A single rotary switch furnishes 5 multiplying ratios of x 100, x 10, ×1, ×.01 and 0.1.  Range of Measurement: The bridge has a range of 2 micro ohm to 11 ohm.  Panel: A bakelite panel enclosed in a teak wood box is used.  Separate current and potential terminals, battery and galvanometer terminals, push buttons for battery and galvanometer are provided on the panel.  Max. Current: 10A intermittently & 5 A continuously. Accuracy: ±0.5% current 5 Amps upto 10Amps Coils: Managanin Coils are used. This bridge is very suitable for the use of wires & cable manufacturers.  It is being extensively used for finding the resistance of transformer winding, contact resistance of relays etc.....

Industrial Drying Oven

• Basic constructional details are same as RT-155, but supplied without trays.
• Optional Accessories : 
•  Tray of Aluminum
• Email us at to further inquire about the product.
• Visit for further details.
• Also you can reach us at (Whatsapp).

Industrial Furnace (Grooved Type)

• Light weight with ceramic fibre wool insulation.
• The outer casing is made of double walled thick MS Sheet, duly painted.
• Chamber is made of Grooved Refractory for supporting the Heating Elements made of Kanthal “A-1” wire on 4 sides. Chamber is backed by high temperature ceramic wool insulation, which avoids loss of energy.
• Temperature control unit consists of energy regulator, fitted in front of furnace with two pilot lamps.
• The apparatus is complete with one Pyrometer, Thermocouple, Silver Thermal Fuse, Main Lead with Power Plug.
• To work on 220/230 volts or 400/440 volts AC. Maximum temp. is 1050°C and working temp. is 1000ºC.
• Optional Accessories : 
• Digital Temperature Indicator cum Controller.
• Email us at to further inquire about the product.
• Visit for further details.
• Also you can reach us at (Whatsapp).

Industrial Hydraulics Training Equipment

Industrial Hydraulics Training Equipment Specification:- Universal Testing Frame constructed of a twinned steel channel frame fastened with high tensile fixings. This creates an overall structure size of 4.61m long, 2.53m high and 1.2m wide and a working space of 4.0m long x1.6m high. The 0.60m spacing between the verticals allows for wide test specimens to be tested.  The base feet distribute the self-weight of about 1 tonne to four anti-vibration levelling feet. The top channel members are used to carry either a single or double acting hydraulic ram Carriage. All these accessories enable specimens to be set up quickly and easily in a variety of arrangements. A set of hollow steel dial gauge support bars should also be included.....

Industrial Installations Trainer

Industrial Installations Trainer....

Industrial Ovens

• Industrial Ovens We manufacture our superior range of industrial ovens, which are specially designed and fabricated for industrial purpose to suit various I.S.
• Standards application in the diverse fields including bulk drugs, rubber industries, industrial purpose, hydrogen de-embrittlement processing industries etc. Features: * Temperature range above ambient, maximum up to 300°c. * Timer upto 999 min.
• Email us at to further inquire about the product.
• Visit for further details.
• Also you can reach us at (Whatsapp).

Industrial Pneumatics Training Equipment

Industrial Pneumatics Training Equipment Description:- We offer industrial training for basic hydraulics, advanced hydraulics, basic will be created using our hands-on industrial grade hydraulic training equipment. Hydraulic training equipment and pneumatic training Equipment through to higher levels suitable for colleges, universities and industrial training centres. Approx. dim: 1210mm(L) x 750mm(W) x 1450mm(H). The trolley must have two (2) circuit building plugboards (approx. size) 1100mm x 700mm, each with mounting holes must be fitted with rubber component retaining grommets. The boards must be powder coated 16swg steel (at least), with 2mm shrouded sockets for electrical distribution built into the plugboard. There must be two (2) lockable equipment storage cabinets, each consists of five (5) drawers (depths are 1 x 66mm, 2 x 85mm, 1 x 130mm, 1 x 200mm - approx. sizes).  Cabinets and all drawers to be steel, powder coated construction including drawer fronts. The trolley must be mounted on four (4) heavy duty, rubber tyred castors two (2) of which are swivel and lockable. The trolley must be mounted on four (4) heavy duty castors two (2) of which are swivel and lockable.  Pneumatics, Comprises:- 1 x Air service unit (filter/pressure regulator) with On/Off valve and pressure gauge 1 x 6-way manifold with check fittings (airflow blocked on the removal of tubing) 1 x Single Acting Cylinder - 16mm diameter, 50mm stroke 2 x Double Acting Cylinder - 16mm diameter, 100mm stroke with magnetic piston for contactless sensing 4 x 3/2 way Push Button Valve (2 baseplates each with 2 valves) 1 x 3/2 way Toggle Lever Valve 1 x Visual Indicator 1 x 5/2 way Toggle Lever Valve 1 x 5/2 way Pilot/spring Valve 3 x 5/2 way Pilot/Pilot Valve 1 x 5/3 way Pilot/Pilot Valve with Closed centre 2 x 3/2 way Roller Lever Valve (for instroke operation) - mounted on the adjustable baseplate (must have both vertical and horizontal adjustment). 2 x 3/2 way Roller Lever Valve (for outstroke operation) - mounted on the adjustable baseplate (must have both vertical and horizontal adjustment). 1 x 3/2 way Adjustable Timer valve 2 x Throttle / Check Valve (on one baseplate) 1 x Quick Exhaust Valve 4 x Shuttle Valve / OR Gate (2 baseplates each with 2 valves) 2 x Two Pressure Valve / AND Gate (on one baseplate) 1 x Stainless Steel Air Reservoir 1 x Pressure Gauge 10 x Push-fit Tee 10 x Push-fit Plug 15 metres 4mm o.d. polyurethane tubing 5 metres 6mm o.d. polyurethane tubing All pneumatic components should mount on four (4) pin plug-in baseplate, complete ready to use with pneumatic connections for 4mm o.d. tubing (supplied) and 2mm shrouded plugs/sockets for electrical connections.  All threaded exhaust ports to be fitted with silencers.....